Running A Full Node - Bitcoin

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

[Tutorial] Build and run your own Bitcoin node on Ubuntu 19.10

I am finally doing my part and running my own bitcoin node in a small home server.
Most guides I found online were either incomplete, outdated, or explained only how to run bitcoin-qt (graphical interface). So I built a minimalistic guide with the starting point of Ubuntu 19.10 to run the latest Bitcoin core release (v0.19.0.1) as of today.
If you have an old laptop (raspberry pi, NUC, etc even better) a reliable internet connection, and ~ 500Gb of HDD (USB external drive are just fine), you should consider running a node. It's fun, you will deepen your computer knowledge, and you will be supporting the network.
A GitHub gist with just the code: https://gist.github.com/Koff/1638aca30d6e14f1dcd374825018074a
A more detailed version with some comments: https://www.fsanmartin.co/running-a-bitcoin-node-on-ubuntu-19-10/
submitted by tokenizer_fsj to Bitcoin [link] [comments]

Running a full node over private VPN. Is there a guide?

Hi,
I've setup an OpenVPN server on a VPS. I am running a full node on my personal computer with only outbound connections and without inbound / incoming connections, because my ISP doesn't let me port forward any ports.
I've connected to my VPN as a client, and have enabled port forwarding on it by doing so:
/etc/sysctl.conf: net.ipv4.ip_forward = 1 
Despite this, I'm unable to still have incoming connections over port 8333 even after being connected over the VPN. Are there any other iptable settings to be done for Post routing and pre routing? Is there any available guide for this?
Kindly help me out with this if anyone has setup one already.
Note: I'm running an OpenVPN access droplet on DigitalOcean over Ubuntu. Also on my personal computer, my firewall is already configured to allow inbound and outbound traffic via port 8333 (tcp/udp) through bitcoin-qt.exe.
submitted by xdrpx to Bitcoin [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

[P2pool] How to make your own personal p2pool Node!

Tired of getting no block rewards and sending many dead shares? Need a p2pool node close to your miner? MAKE YOUR OWN! :D
And, Yep, P2pools give 0.5% Rewards to block finders!
Here's some info about p2ools: http://whatisp2pool.com/
The stronger the P2Pool network becomes the more resistant the digibyte network is to 51% attacks!
Oh and, P2pools are DDOS proof! Now that's News! So if your node gets DDOS'd .. you dont lose your shares as the shares have been saved in the p2pool, its called the sharechain. So you get paid anyhow! Thanks to the p2pool network. and you ccan set your workers to another pool using the "--failover only" command in cgminer (if im not wrong) and get it back to work on the p2pool network!
TL;DR; P2POOL = 1 Big fat network Decentrazlized pool!
STEPS TO MAKE A P2POOL:
Install Ubuntu server or Desktop if you want http://www.ubuntu.com/download/ or u can use a VPS (VirtualPrivateServer -- Link Below with coupon code)
So Let's start off in the command line (Open Terminal.. and all you have to do is Cut, Copy Paste! ;) )
Start by updating and upgrading Ubuntu, you know you want the best ;)
sudo apt-get update sudo apt-get upgrade sudo apt-get install python-software-properties sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update 
Time for the DigiByteProject dependencies!
sudo apt-get install build-essential libboost-all-dev libcurl4-openssl-dev libdb5.1-dev libdb5.1++-dev git qt-sdk libminiupnpc-dev sudo apt-get install qrencode libqrencode-dev 
And, Now to compile DigiByte on your system!
git clone git://github.com/digibyte/DigiByteProject.git digibyte #renaming makes it easier ;) cd ~/digibyte/src mkdir obj make -f makefile.unix USE_UPNP=- sudo cp digibyted /usbin cd ~ 
After it has compiled try running 'digibyted'
./digibyte/src/digibyted 
If you get an error saying you need to make the digibyte.conf file, good! :) If it doesnt give you that error, make sure you followed the compiling steps appropriately.
So, Lets create the conf file here...
cd .digibyte #edited from 'digibyted' .. fixed!! nano digibyte.conf 
Paste the following, CHANGING THE USERNAME AND PASS!! make sure to take note of both, you'll need these later!
rpcuser=CHANGEusername rpcpassword=ChangePassword daemon=1 server=1 rpcport=14022 port=12024 gen=1 rpcallowip=127.0.0.1 addnode=74.208.230.160 addnode=31.220.25.91 addnode=184.155.218.183 addnode=24.119.23.61 addnode=70.196.193.231 addnode=198.98.118.241 addnode=142.4.204.115 addnode=23.90.191.58 addnode=216.250.125.121 addnode=115.28.31.25 addnode=83.172.105.46 
Press 'CTRL' + ' X', and then 'Y' to save when prompted
cd ~ ./digibyte/src/digibyted ./digibyte/src/digibyted getinfo 
Make sure you check the latest block in the block chain or on your local DigiByte Wallets. This is to see how far your p2pool node has gotten! This is gonna take quite a while so lets CONTINUE!
Let's get the p2pool software and frontend in! Install the p2pool dependencies!
sudo apt-get install python-zope.interface python-twisted python-twisted-web git clone https://github.com/Rav3nPL/p2pool-rav p2pool #renaming it! cd ~/p2pool/digibyte_subsidy #Thanks to Chaeplin sudo python setup.py install 
Time to edit and customise the html code to personalise your p2pool's frontend. Feel free to change the p2pool name and if you're an advanced user, feel free to add your own frontend from git hub after removing the web-static folder. (OPTIONAL: by using rm -f -r web-static #in that directory. And then you can choose whichever frontend you want! by cloning it in the web-static folder)
Editing the current frontend html!
cd .. cd web-static nano index.html 
After personalising the page, i.e. changing the p2pool name and adding some info! Lets go back and check how far the block downloading has gotten! You can check this by typing this in the command line after going back to the root directory:
cd ~ ./digibyte/src/digibyted getinfo 
This is gonna take a while so might as well check for updates again :P
sudo apt-get update sudo apt-get upgrade 
After making sure that all the blocks have been synced locally! We're ready to run the p2pool node! Simply enter the string below in the command line, entering your USERNAME and PASS that you saved earlier!
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 
If you want to charge a fee for your node add this to your string, adding your fee address!:
--fee 1.0 --address NEWDGBADDRESS 
To see if the node is up and running enter this in the command line:
screen -x myp2pool 
'CTRL' + 'A' + 'D' to close the terminal if you press 'CTRL' + 'C', it will terminate the p2pool program and you'll have to restart the pool by using the string above!
Once, Everything is setup as planned! Check your p2pool node's ip Address by entering this into the command line:
ifconfig 
inet addr: 192.168.1.1 #You'll see a line like this.
So, Your cgminer string should look something like this:
cgminer --scrypt -o 192.168.1.1:9022 -u DGBADDRESS -p x
And your p2pool WEB ADDRESS should look like this:
192.168.1.1:9022
example: http://192.168.1.1:9022/
You can monitor your p2pool using that web address! Enjoy, your personal p2pool node!! :D
If for whatever reason the server shuts off and you need to restart the p2pool node, you should run digibyted again and after it has synced successfully, just type in your p2pool string:
./digibyte/src/digibyted
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 --fee 1.0 --address NEWADDRESS
PRESS CTRL + A + D to Detach from screen
UPDATE Follow Guide below if you used this guide before DigibByte v2.0 was released (28th Feb 2014)
You must check whether you're on the right ShareChain. Make Sure the block Value says 7960!
https://bitcointalk.org/index.php?topic=408268.msg5440858#msg5440858
This Tutorial was made with the help of an existing Guide: http://doges.org/index.php?topic=5586.0 Kudos to crypto49er!
If you want to do this on a VPS:
Here's a link to a VPS hosting site:
https://www.digitalocean.com/
Feel free to use my $10 ref. code -- it doesnt really make a difference, though.
https://www.digitalocean.com/?refcode=dc909c442664
Let me know if this guide helped!
submitted by StormMiner to Digibyte [link] [comments]

Installing Bitcoin-Qt Video Guide: How to configure an email server on Ubuntu for Bitcoin Pool using postfix and Gmail How to Install Bitcoin Core Wallet on Ubuntu 16 4. Installing Bitcoin Core on Linux How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS

Bitcoin is a distributed, worldwide, decentralized digital money … Press J to jump to the feed. Press question mark to learn the rest of the keyboard shortcuts. r/Bitcoin. log in sign up. User account menu. 14. Run your own Bitcoin Server on Ubuntu! My easy guide using VirtualBox. Close. 14. Posted by. u/virtuexru. 5 years ago. Archived. Run your own Bitcoin Server on Ubuntu! My easy guide ... This one’s for you. I want you to learn Linux, and I want Bitcoin to motivate you to switch. This will be as much a “Linux for Dummies” guide as it is a guide to setting up a Bitcoin node. If you already know a thing or two and want to skip all the useless words: Just copy and paste the commands at the bottom of this article. Ubuntu is often recommended as an operating system on which to run Bitcoin Core.Although Bitcoin Core can be installed as a precompiled binary, this method won’t work in every situation.This guide shows how to compile Bitcoin Core from scratch on a clean Ubuntu 18.04 system. Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies Note that you should prefer to use the official binaries, where possible, to limit trust This tutorial shows you how to install Bitcoin Core Wallet on Ubuntu , Ubuntu and how to change bitcoin data directory. How to set up a Bitcoin Unlimited make things easier later on since bitcoin unlimited is easy to install on ... bitcoin-qt; bitcoin-tx; bitcoin-wallet; test_bitcoin; Because we installed this on a GUI-less server, we’ll be using the bitcoin Core Daemon. To start the daemon, issue the command: bitcoind -daemon. This will inform you that the bitcoin daemon is starting. Once the daemon starts, it will begin to download the blockchain, which will take several days to complete. During this process, it will ...

[index] [23354] [40540] [43506] [10466] [21348] [18431] [17315] [25730] [25577] [34646]

Installing Bitcoin-Qt

To add the PPA and install Bitcoin open a terminal window (press Ctrl+Alt+T) and copy+paste the following lines: sudo apt-add-repository ppa:bitcoin/bitcoin -y sudo apt update && sudo apt install ... sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install bitcoin-qt bitcoind Linux terminal new stuff: clear, ll, cd, touch, echo, cat, shutdown www.bitcoinhackers.org How to build an altcoin or bitcoin on Ubuntu Linux Server Shell - Duration: 11:08. Antonie Geerts 10,768 views. 11:08 . How to compile and run VanityGen Bitcoin tool in Ubuntu 14.04 - Duration: 6 ... Bitcoin 101 - Getting Your BTCs out of Your Paper Wallets & Cold Storage - Fun with Sloppy Wallets - Duration: 10:54. CRI 82,619 views How to install Bitcoin on Ubuntu 16.04 On this video, I will show you how to install Bitcoin on Ubuntu 16.04 Commands sudo apt-add-repository ppa:bitcoin/bi...

#